Return to Website

This forum is only for the technical matters. Please use contact in the main site for other topics including business inquiry.Any post other than technical topics may be removed by webmaster without permission. We hope your kind understanding about the the operation policy of the forum.

General Forum
Start a New Topic 
Author
Comment
NF DAC 384 balanced out

Is the NF DAC 384 balanced out fixed or controlled by the volume control?

Thanks

Re: NF DAC 384 balanced out

Hi Guido

Apple remote volume control works fine with all outputs.
Please read here . and check that your Apple remote is this correct one http://www.lead-audio.bravesites.com/files/documents/Remote.pdf
Best regards
Soren

Re: NF DAC 384 balanced out

Thanks Soren

The Apple remote works fine and it is the one shown in the link...I am just not sure how it takes over the volume control on the fixed outputs since the volume knob on the DAC does not work on those outputs.

The DAC is not seen by the Sony TV or any of my IOS devices

Re: NF DAC 384 balanced out

Hi I would like to know also if the Apple remote can control the volume of the XLR output? Or is the XLR output always fixed, and volume has to be controlled by an additional preamp?

Thanks Darren

Re: NF DAC 384 balanced out

Darren Smith
Hi I would like to know also if the Apple remote can control the volume of the XLR output? Or is the XLR output always fixed, and volume has to be controlled by an additional preamp?

Thanks Darren


It can but it is not very useful since it seems to start from Max volume by default...it cannot be adjusted with the external knob, only with the Apple remote...

Re: NF DAC 384 balanced out

I see, thanks for the info.

My plan was to connect active speakers straight from the xlr outputs, and I need a way to control the volume via a remote. I can use the variable rca out, but would have preferred to use xlr.

Re: NF DAC 384 balanced out

Darren Smith
I see, thanks for the info.

My plan was to connect active speakers straight from the xlr outputs, and I need a way to control the volume via a remote. I can use the variable rca out, but would have preferred to use xlr.


I have the same problem so I have connected my Adam Artist 5s on the variable RCAs

Re: NF DAC 384 balanced out

I wonder if a firmware update could rectify this...??