Return to Website

Lighthouse PLCs, Inc. : Automation Forum

THE PURPOSE OF THIS FORUM IS: AUTOMATION SOLUTIONS.  IF YOU ARE A PERSON INVOLVED IN SOME ASPECT OF AUTOMATION, HAVE AN APPLICATION YOU JUST CAN'T QUITE GET A HANDLE ON  - HAVE A PRODUCT QUESTION - OR MAYBE HAVE AN ISSUE WITH SOMETHING (EVEN IF IT IS WITH US    ), IT IS POSSIBLE YOU WILL FIND THE ANSWER HERE!!  

 OR,  IF YOU  ABSOLUTELY KNOW  THE ANSWER, OR EVEN THINK  YOU KNOW THE ANSWER, THEN JUST POST IT! MAKE THAT REPLY!
YOU ARE PROBABLY RIGHT ON THE MARK, AND MIGHT BE ABLE TO HELP SOMEBODY OUT!!    

AND, IT COULD BE YOU THAT NEEDS HELP NEXT TIME. AFTER ALL...(REALLY?).. ARE WE NOT ALL "CHILDREN" - AT VARIOUS POINTS ON THE LEARNING CURVE OF TECHNOLOGY" ???  (I know I've still got a lot to learn and I've been at it for... well since 1970!)

Hopefully the information presented here will help provide solutions to some of today's automation challenges. Some issues are probably old, some are probably new. Many are products of the economy, the resultant reduction in manpower, exacerbated by aging equipment crippled by decreases in maintenance budgets.  The ULTIMATE goal here is that we all become more successful in our careers and chosen professions.

      MAYBE THIS FORUM CAN HELP!!! 

You know the rules - ADVERTISING IS NOT ALLOWED  ! 

This area is for we, :

No Offense Intended...the Fraternal Order of Propeller-Heads No Offense Intended

 You know the rest - no flaming ,  profanity, blatant advertising,  etc., etc., blah, blah, blah.  If you are 5 years old, or feel like acting 5 years old, you really need to go outside and ride your bike - OH, and seek some professional therapy.  Yea, that would be good, too!

OH!  BTW, if you don't feel like providing your name/company, just put "Anonymous" / "Withheld"/ "Not On File" or Anything!  I promise we won't tell !

Note:  For best viewing..
We suggest switching to "Board Style" (below) rather than "Threaded Style" !
Your choice!  

 

PLC and Inverter Forum
This Forum is Locked
Author
Comment
Re: Dos MEDOC and Win 2000

Oct 4, 2002 12:31 pm, by Paul Miller


Mitsubishi Electric do not recommend the use of Windows 2000 and will not support product running on this platform. We have tried some of the Mitsubishi software under Windows 2000 with the following results. Please bear in mind that we have not extensively tested the various packages and provide no guarantees that they are fully functional. The results can be used as a guide to likely issues and solutions.




MAC Programmer Version 5,Yes Serial only tested




GPPWin C24 port Yes Use special cable 2-3, 3-2, 5-5, 4-6, 6-4, link 1-7-8 both ends




GPPWin CPU port Yes Must tick 'MAC Transparent'




DOS MEDOC 2.3 C24 port Yes




DOS MEDOC 2.3 CPU port Yes Need to start MEDOC using command switch ...medoc.exe F20




DOS MEDOC 2.3 via E terminal Yes Need to start MEDOC using command switch ..medoc.exe F20




GPPWin via E Terminal No Needs further work, unable to test new cable wiring




PCS WIN ver 3 CPU port Yes No special requirements




PCS WIN ver 3 BD port Yes No special requirements



Reply


Re: Re: Dos MEDOC and Win 2000

I am looking for a copy of the Dos version of MEDOC.
Do you know where I could get a copy.

--- --- --- --- --- --- --- --- ---

Replying to:

Oct 4, 2002 12:31 pm, by Paul Miller


Mitsubishi Electric do not recommend the use of Windows 2000 and will not support product running on this platform. We have tried some of the Mitsubishi software under Windows 2000 with the following results. Please bear in mind that we have not extensively tested the various packages and provide no guarantees that they are fully functional. The results can be used as a guide to likely issues and solutions.




MAC Programmer Version 5,Yes Serial only tested




GPPWin C24 port Yes Use special cable 2-3, 3-2, 5-5, 4-6, 6-4, link 1-7-8 both ends




GPPWin CPU port Yes Must tick 'MAC Transparent'




DOS MEDOC 2.3 C24 port Yes




DOS MEDOC 2.3 CPU port Yes Need to start MEDOC using command switch ...medoc.exe F20




DOS MEDOC 2.3 via E terminal Yes Need to start MEDOC using command switch ..medoc.exe F20




GPPWin via E Terminal No Needs further work, unable to test new cable wiring




PCS WIN ver 3 CPU port Yes No special requirements




PCS WIN ver 3 BD port Yes No special requirements



Reply