Return to Website

Lighthouse PLCs, Inc. : Automation Forum

THE PURPOSE OF THIS FORUM IS: AUTOMATION SOLUTIONS.  IF YOU ARE A PERSON INVOLVED IN SOME ASPECT OF AUTOMATION, HAVE AN APPLICATION YOU JUST CAN'T QUITE GET A HANDLE ON  - HAVE A PRODUCT QUESTION - OR MAYBE HAVE AN ISSUE WITH SOMETHING (EVEN IF IT IS WITH US    ), IT IS POSSIBLE YOU WILL FIND THE ANSWER HERE!!  

 OR,  IF YOU  ABSOLUTELY KNOW  THE ANSWER, OR EVEN THINK  YOU KNOW THE ANSWER, THEN JUST POST IT! MAKE THAT REPLY!
YOU ARE PROBABLY RIGHT ON THE MARK, AND MIGHT BE ABLE TO HELP SOMEBODY OUT!!    

AND, IT COULD BE YOU THAT NEEDS HELP NEXT TIME. AFTER ALL...(REALLY?).. ARE WE NOT ALL "CHILDREN" - AT VARIOUS POINTS ON THE LEARNING CURVE OF TECHNOLOGY" ???  (I know I've still got a lot to learn and I've been at it for... well since 1970!)

Hopefully the information presented here will help provide solutions to some of today's automation challenges. Some issues are probably old, some are probably new. Many are products of the economy, the resultant reduction in manpower, exacerbated by aging equipment crippled by decreases in maintenance budgets.  The ULTIMATE goal here is that we all become more successful in our careers and chosen professions.

      MAYBE THIS FORUM CAN HELP!!! 

You know the rules - ADVERTISING IS NOT ALLOWED  ! 

This area is for we, :

No Offense Intended...the Fraternal Order of Propeller-Heads No Offense Intended

 You know the rest - no flaming ,  profanity, blatant advertising,  etc., etc., blah, blah, blah.  If you are 5 years old, or feel like acting 5 years old, you really need to go outside and ride your bike - OH, and seek some professional therapy.  Yea, that would be good, too!

OH!  BTW, if you don't feel like providing your name/company, just put "Anonymous" / "Withheld"/ "Not On File" or Anything!  I promise we won't tell !

Note:  For best viewing..
We suggest switching to "Board Style" (below) rather than "Threaded Style" !
Your choice!  

 

PLC and Inverter Forum
This Forum is Locked
Author
Comment
MEDOC programming help needed.

We have been using Shihlin A1-60MR in our elbow forming machine and we have one A1-20P-E hand held device to program the PLC. Currently we need to program one PLC and I am facing the following problem.

In one of the rung the output is an address for timer (450). Unless I set a time for the timer, the program is showing error. Can anyone please help to set the timers (100ms, adresses are 50-57, 450-457, 550-557) and (10ms, adresses are 650-657). Please let me know how I can set the timers using the hand held device (A1-20P-E).

Regards,
Rashedul Hasan